At 09:46 AM 2/11/97 -0700, you wrote:
>     Kalle,
>
>     Yes, Todd called me directly and we finally determined that his
>     problem was with the PICSTART programmer.
>
>     There is a bug in the PICSTART programmer that when you are in
>     simulator mode, it will let you change the calibration constant,
>     program a part and tell you that it did it when it really didn't!
>
>     To see this, switch to editor only mode in MPLAB and read the part,
>     the calibration value will be read correctly.
>
>     This problem will be fixed in the next version of the PICSTART
>     software due out quite soon.


List Members,

Sorry for the delay in posting the working solution - I have been away and
also wanted to verify the solution.  It seems this is the problem; to solve
it (until MPLAB is fixed), just make sure to switch over to EDITOR ONLY mode
when programming, or else the cal. constant won't be written.  Doing this
solves the problem.

        -Todd



   .--------------------------------------------------------------.
  /  .-.            E-Lab Digital Engineering, Inc.           .-.  \
 |  /   \   Embedded Control & Integrated Circuit Solutions  /   \  |
 |  \_.  |                                                  |    /  |
 |\   | /|      http://www.netins.net/showcase/elab         |\  |  /|
 | `---' |                                                  | `---' |
 |       | EDE700 Serial LCD Display Driver IC coming soon! |       |
 |       |--------------------------------------------------|       |
  \     /                                                    \_____/
   `---'