D. and S. Ebsen wrote:
>
> I need to link(RF or microwave) two 16c84's for one-way serial coms.
> Range only needs to be ~ 5 ft, baud => 1200.  I would prefer a single
> chip if possible with no external inductor, preset frequency is fine.
> Could someone point me in the right dirrection?     Thanks, Dave Ebsen.

Hello Dave,
Two years before i develop Remote Control transmitter/receiver
for Car Alarm Security system based on PIC-16C56 (TX) and PIC-16C57 (RX)
for comercial company Spetrotec LTD.
The RF frequency is 300 MHz.
Data : Near 1200 baud transmition
Range : About 30 meters
The software can be installed also on 16x84. If you are interested then
reply to me
personaly to my E-Mail address for further information.
Bye,
Radik Yanai