Hello
 I am having trouble initializing my 2x8 optrex lcd w/hd44780a
controller
in 4 bit mode.I have tried everything I could glean from the FAQ's but
it just
does'nt shift to 4 bit mode and all subsequent writes cause the cursor
to move
two places.In the simulator the write routine 4 bit writes upper
nybble,lower
nybble with no extra loops and the character printed bears no relation
to the
one I was attempting.I am using bits <4..7>b for data & bits <1..3>b for
control
The rs & r/w bits are output with enable low then enable is toggled high
and the
4 data bits are output then the enable bit is toggled low.
        Thanks in advance for any help. Tony M.
ps Digi_Key #73-1106-nd