>Hi.
>
>I've just finished making a PCB for the PicPro 2.5 (using Advanced
>PCB/Schematic - Protel for Windows).
>
>The PCB matches Octavio's original schematic, except that it uses a LM317L
>instead of the 7808. Furthermore I've changed the V-reg. output capacitors.
>It includes the 'production-mode' programming (extra LM317L+trim-pots).
>
>The PCB is single sided, approx. 10*7cm, space for zif-socket and a socket
>for in-circuit programming. Smallest clearence/track-width are 15mils,
>which should make it easy to make 'at home'.
>
>If anybody wants the PCB+schematic, I'll post it in personal E-mail as soon
>as I've etched/tested it (beginning of next week).
>
>-Jacob Blichfeldt
>blchfldt@post3.tele.dk

Sounds good to me. Once it works could you send me the Protel files too, I
think our electronics lab can read them (providing I ask very nicely).

Many thanks,

Keith.
==========================================================
Keith Dowsett         "Variables won't; constants aren't."

E-mail: kdowsett@rpms.ac.uk
WWW:    http://kd.rpms.ac.uk/index.html