Norm Cramer wrote:
>
> At 08:27 AM 12/9/96 -0600, you wrote:
> >The January 1997 issue of Electronics Now has a interesting article on
> > using the PC printer port as a logic analyzer.  I have known this was
> >possible
>
> I also saw the article and would like to build one.  The parts they used are
> surface mount and I would prefer through hole.  I tryed to find the parts at
> several on-line distributors but was not able to.  I prefer the thru-hole
> since I would want to wire wrap it rather than make a board.  The parts are
> listed as:
>
> HCF4060BM - 14 stage oscillator-divider
> HCF40106BM - CMOS hex Schmitt Trigger
>
> Any ideas?
>
> Thanks,
>
> Norm
These are I believe standard 4000 series cmos and they have them at
mouser as well as the 74hc4060 for ttl level's