Robert Lunn wrote:
>
> >I need to measure a continuous frequency between 0 - 250 cycles/MINUTE,
> >and transmit it via RS-232 at 2400 baud in a message containing 6 bytes
> >once 5 seconds.
> >
> >The PIC I plan to use is the low power 84 variant, running at 32 KHz,
> >if possible.
>
>         Peter, you don't indicate the accuracy with which you need
>         to measure the frequency...
Bob,

I only need an accuracy of +/- 0.5 cycles/minute.

Peter
--
_______________________________________________________________________
Peter Homann   email: peterh@adacel.com.au       Work : +61 3 9596-2991
Adacel Pty Ltd                                   Fax  : +61 3 9596-2960
250 Bay St, Brighton 3186, VIC, AUSTRALIA      Mobile :     014 025-925