Are you wanting to convert a 4-20mA to a 0-5V or a 1-5V?

**************************************************************************


>Rob BRUCE-BRAND <BRUCE-BRANDRA@DURBAN.GOV.ZA> wrote:
>>I'd appreciate some ideas on a precision, temperature-stable current
>>to voltage circuit to convert e.g. a 4-20mA signal to a 0-5V signal
>>(which I will then feed into a Voltage-to-freq converter and read
>>with a uP).
>
>A 249 ohm 1% resistor works for me.
>
>--
>Bob Fehrenbach    Wauwatosa, WI     bfehrenb@execpc.com
>
>
Jack Rutherford
jruther@preferred.com