Hey all, this will be the first real problem I have presented this list and
I hope SOMEONE can come through for me.

Buttering up aside, I have a 12-bit DAC (AD737) interfaced to a PIC16C74.
I'm useing the PCW "C" compiler from CCS.  I am trying to build a
ultra-stable AC synchronious motor driver.  So I have a sine wave
represented as a 160-point data set that I generated with a basic program
and imported into my code as an array.  This data-set represents one half of
one period of the sine wave.  The PIC sends each value in the set out to the
DAC and at the end of the set subtracts the numbers from half scale to
produce the negative part of the period, then the whole thing loops.  The
PIC is looking at a 20Khz, 90% duty cycle ttl square wave that comes from
the PWM module.  This square wave also updates the DAC.  The result should
be a 62.5 Hz, +5VDC to -5VDC sine wave coming out of the DAC.  The PIC loads
the new DAC value only after seeing the DAC get updated by the 20 Khz pulse
and then waits for the next DAC update before loading the next number.  The
DAC update is then fed into an APEX high voltage amp to produce a large sine
wave.

The problem is that the resulting sine wave is really 62.52 Hz (5 us too
fast).  I have used several different sources for the 20Khz update pulse
with no change in performance so I don't think that could be the problem.

The device this control is intended for needs stability better than +/- 1us.
(Thats less than +/- 1us per revolution at 62.5 Hz)
Right now we are running it with a 62.5 hz ttl square wave, being fed into
an inverting amplifier, then a transformer to produce a +/- 60 V square wave.

Anybody have any suggestions on:
1. What could this problem be?
2. Is there a better/easier way to achieve an ultra-stable sine wave?
3. Is there a ultra-stable motor-driver I can buy ready-made?
4. Is there another solution besides a synchronious motor that could provide
a more stable rotation at these speeds?

I hope there's someone out there smarter than me!

Shawn