Hi Arthur, here SET from Argentina:

>Hi folks,
>        Can anybody help with the following questions I have regarding the PIC
 =
>processors;
>        1) When enabling the internal port pull-ups on PIC processors, =
>approximately what value of pull-up resistance is applied internally to =
>the individual bits on the port ?.
If I remmember well the weak pull-ups of port B are equivalent to a 20K
resistor (not resistors! equivalent to ...).

>        2) Is this value approximately the same for all types of PIC processors
 =
>with this feature ?.
I saw this value on the 16C622 data sheet.

SET

********************************************************************************
Salvador Eduardo Tropea (SET) - salvador@inti.edu.ar
Work: INTI (National Institute of Industrial Technology) Sector: ICE
(Electronic Control & Instrumentation)
Post (Home): Curapaligue 2124 - Caseros (1678)- Buenos Aires - Argentina