David Schmidt <dschmidt@rain.org> asked me to forward a copy of this
message to the list, so...

------- Forwarded Message Follows -------

>Brad Pousland <PICLIST@MITVMA.MIT.EDU> wrote:
>
>> I have one of those protoboards from Depew engineering which I
>> bought from Digi-Key.  The oscillation circuit on their schematic
>> looks like this:
>>                                         c2
>>                        +5       GND----| |----------osc2(pic)
>>                         |                      |
>>                         /                      X1
>>                      R1 \                      |
>>                         /                      |
>>                         ----------------------------osc1(pic)
>>                         |
>>                        ---
>>                    C1  ---
>>                         |
>>                        GND

    Perhaps R1 is used when the PIC is setup for an RC oscillator
    and no xtal.  They may be trying to use one board for both
    possible setups.

------- End of Forwarded Message ------


Andrew Warren - fastfwd@ix.netcom.com
Fast Forward Engineering, Vista, California
http://www.geocities.com/SiliconValley/2499