Dennis Velthuis <PICLIST@MITVMA.MIT.EDU> wrote:

> While reading the PIC 16/17 Databook I noticed the following
> about the 16C54.
>
> "A read of the ports reads the pins, not the output data latches,
>  i.e., if an output driver on a pin is enabled and driven high, but
>  the external system is holding it low, a read of the port will
>  indicate that the pin is low."
>
> This isn't mentioned in the datasheet about the 16C84.
> Now my question is, does the 16C84 support this too?

Dennis:

Yes, although most users would have phrased the question as, "Does
the 16C84 have the same problem?".

-Andy

Andrew Warren - fastfwd@ix.netcom.com
Fast Forward Engineering, Vista, California
http://www.geocities.com/SiliconValley/2499