Ok,  Then there are two possibilities:

     1)  You have loaded an application that has BWCC already loaded.
     Since it is the old version, it is in memory and will not load a new
     one from disk.  If this is the problem, you need to restart your
     computer.  That should fix it.

     2)  You have another copy of BWCC.DLL somewhere in your path.  Check
     \WINDOWS, \DOS, and any other directory that you have in your path.
     Walk your path and try to find the other copy.  I would just delete it
     if you find it.

     I would classify the option 1 as the most probable.

     I hope this helps.  Sorry for the runaround.

     Jim


______________________________ Reply Separator _________________________________
Subject: Re: toolbar problem
Author:  "Donald F. Wright Jr." <dnwright@AVLNA.COM> at Internet_Exchange
Date:    6/7/96 12:53 PM


At 09:18 AM 6/7/96 -0700, you wrote:
>     To fix that problem you need to go to DOS or a file manager and look
>     in your \windows\system directory.  There probably is a file called
>     BWCC.DLL in there.  It is out of date.  Copy the BWCC.DLL from your
>     MPLAB directory into \windows\system and you should be fixed.


I didn't work.  Nothing changed.

   Donald Frederick Wright Jr.

   School info: Lawrence Technological University
   E-mail: DW79208@LTU.EDU

   Work Info: AVL North America
   E-mail: DNWRIGHT@AVLNA.COM