msullivan@VAX.NIOBRARA.COM> writes:

>...beacon CONTROLLER!  In the following, the PIC is the whole beacon.  Just add
>a crystal, power (I use three 1.5V alkalines) and connect an antenna to OSC
 OUT.

Wonderful idea, Mark.

>; The relative duration of Morse code elements is as follows:
>; dit = 1, dah = 3
>; inter-element delay = 1
>; inter-character delay = 4 (ARRL says 3 but that's not 2^n)

If you always have an inter-element delay after each dit and dah, you can make
the inter-character delay = 2, and then the Morse timing will be correct.

I am converting your program to run on a 16C84, but haven't got it working
(yet).   WDT is new to me.   73

 .-._/\
/      \
\_.--._/
      v <--- Richard Rogers, VK7RO@hba.trumpet.com.au