|
|         Does anyone know of a source for a PLCC (28,52) pin breakout board
|         for circuit prototyping?
|
|         Thanks,
|      __           Micheal Yano
|     ----          Internet:     miy@cimtek.on.ca
|   -CIMTEK-        IBMMAIL:      i1320285@IBMMAIL.COM
| ------------      Voice:        (905)847-8811 x22
|                     FAX:        (905)847-8822 x22

Newark sells PLCC wirewrap sockets...but they are expensive around
$60-70 if i remember correctly... (i think Farnell also sells these..)

what i used is a regular 52pin plcc socket with soldertail tabs and was
able to wirewrap to the pins then dabbed them with a bit of solder so they
would not come loose...worked pretty well and only cost $1.50 per
socket.

good luck...