On Thu, 7 Dec 1995, Mike Goelzer wrote:

> >hi pickers,
> >
> >I am using the PIC16C74 and wonders if it is possible to program the
> >configuration fuses such as watchdog, crystal selections, code protection,
> >et straight from assembly instead of programming them manually at the
> >programmer terminal.
>
> I don't know what hardware/software you're using, but with the Parallax
> assembler
> (my favorite b/c unlike some others on this list, I actually like the
> mneumonics), add
> this line to the begining of your code:
>
>         DEVICE  PIC16C57,XT_OSC,WDT_OFF,PROTECT_OFF
>
> The above example assumes a PIC16C57, a crystal osc. and the WDT and code
> protect turned off.  You can of course change these to suit your needs.
>
> If you are using other software, the method will be different.  Check your
> docs or
> repost with the name of the software you're using and someone will probably
> be able to answer you.
>
> -mike
> --
> Mike Goelzer
> <mgoelzer@us.net>
>
I am using the starter kit with has the MPASM assembler.  And I don't
think that it has those options that you mentioned.



thanks,
N.  Edouard