On Sat, 18 Nov 1995, Nigel Goodwin wrote:

> In message <9511181505.aa09606@punt-4.mail.demon.net> PICLIST@MITVMA.MIT.EDU
>  writes:
> > Hi, I am looking for just a link, I am currently modifing my son's toy
> > school bus with a motor and lights... I was looking at infrared to control
> > it. Perhaps what you have can also do the trick. Please EMAIl me the details
> > to davidw@ggx.com.
>
> If it's any help, I'm currently writing software for the 16C84 to receive and
> decode IR from the current Sharp Electronics remote controls. So far I'm able
> to reliably receive the signals and turn LED's on accordingly. To receive the
> IR I'm using a small IR receiver IC from a TV, this has three connections,
> positive supply, earth, and data out. If you are interested please feel free
> to contact me.
>
> Nigel.
>
Just a pointer to a good source on information on IR remote control
(I hope i can read my own writing )

hemul.nada.kth.se  /home/d89-bga/hp/files/remote/rem32bg

This contains code for the IR port of an hp48 but lots of info on ways
of coding THE IR signal for a lot of makers, well worth a check for those
interested in IR remote control.

/Sten
---
Sten Dahlgren  CelsiusTech Systems   ! "I'd rather have 39 Hp under my arm
S-175 88 Jaerfaella      Sweden      ! than one under my backside"
seda@celsiustech.se +46-8 58084430   ! join your nearest karting club now !!