William D. McMillan wrote: >I'd be interested. What formats are the documents in? Did I miss something here ? After my original REQUEST FOR code I only got William's response. Did someone else respond with a message saying that he actually HAS code? Please enlighten me on that matter. (William ?) :-) BTW I solved the BUZ11 (with 'A'-mark) problem... To make a long story short - They ARE BUZ11s (the 'a bit longer' story... ;-) One might be suprised what hobbyists have in their most hidden drawers. I remembered that I build a constant current regulator (from a printed article) and actually found it in it's hidding place :-) So I but the current regulator in between a strong power source and the drain of the BUZ11. After applying the sufficient ON-voltage at the BUZ's gate I set the regulator to 1 Amp. and measured the voltage between Drain and Source... 35 mV -> 35 mOhm (plus 10% error with my DMV make less than 40 mOhm) => BUZ11 specs (First I measured the voltage with about 2 cm of wire in between, only got 72 mV, my... what 2 cm can do to measurment :-[ ) Bye for now... Have a nice weekend :-) I'm going to bug my RC receiver to determine if I can't decode some pulses... :-) **************************************************************************** * Roman VALEHRACH eMail-to: e8927070@student.tuwien.ac.at * * student of technical university vienna (subject of annual change) * * * * "SHARE AND ENJOY, SHARE AND ENJOY... " furry creatures ->* * "The EARTH: ..... (ed., revised: MOSTLY) HARMLESS" from alpha-centaur * * "Say.. is there ANY tea on THIS ship ?" (footprints) * ****************************************************************************