On Fri, 22 Sep 1995, ian smart wrote:
>
> What other techniques can be used in this debugging enviroment.

Ian,

        I have been using a logic analyzer as the debugging tool for my
16C57 project.  I have some spare I/O so I output diagnostic codes to
flag the operation of individual segments of code.  I also output results
as needed so that I can check them.

        The logic analyzer is great because I can observe the external
events as well such as serial access to an A/D.  Logic analyzers are
expensive but I found an old Tektronics DAS 9100 for $300 in an
electronics salvage place.  I don't think they knew what they had.

Good Luck,

Martin Kirk
Arizona State University
mlk@asu.edu
(602) 582-5718