On Sat, 26 Aug 1995, Mike Jennings wrote:

> Hi All
> I am going to ask a very literal question. What programmer can be used to
> program 16c5x series and 16c6xx series of micros. Keep in mind the home
> project makers budget.
>
> I have a programmer circuit for the pic16c84 already in the making (by david
> tait).
>
> Thanks
>         Mike
>

Silicon Studios I believe will soon have a low cost PCB that will do most
PIC variants on one board, all driven from a parallel printer port. Covers
18, 28, and 40 pin devices.

They can be contacted at:

                                      Silicon Studio
sis@rasi.lr.ttu.ee                    PO Box 3500
ftp://rasi.lr.ttu.ee/pub/sis          Tallinn EE0001
http://rasi.lr.ttu.ee/~sis            Estonia
----------------------------------------------------------


Hope this helps, Don...

Don McKenzie                ~~   _--_|\    ~~   Email: donmck@tbsa.com.au
29 Ellesmere Cres.,         ~~  /      `\  ~~   Phone:   + 61 3 9338 6286
Tullamarine 3043 Australia  ~~ (         ) ~~  Mobile:   + 61 019 939 799
(10 Miles from Melbourne)   ~~  \/~^~\_@/  ~~   Same address for 21 years
                                       v