Would it be possible for me to get the pic serial programmer code David
Taite wrote? I have a parallax programmer and am interested in building
a new one, to program all the microchip series.
Thanks,
Scott Stephens

>Thank you for the reply Tim.  I'm sort of cheating.  I'm using the
>parallel port for the communications.  As a result, I can control
>each of the pins directly.  I borrowed this idea from the pic serial
>programmer code that David Taite wrote.
>
>I think that my problem is that I'm clocking too fast, but I haven't
>verified that this is true.  My pc runs at 33MHz, and the pic is running
>at 20MHz.  In the past, I did some timing runs on the parallel port, and
>I think that I could only sample in the 100 kHz range.  So, I still
>may have some other problem.
>
>Cheers,
>
>Derrick Early