On Mon, 21 Nov 1994, Alan Rothenbush wrote:

> application note.  The only difference is that I tie -MCLR high, thru a diode,
> to an output pin emitting a "one" immediately after reset.  This very
> effectively removes the RC time constant "concern" from the picture.
>
> And -MCLR is tied high pretty effectively .. what's causing the reset ?
>

You might try putting a small bypass capacitor on the MCLR line since you
have it tied to another output. Say a .001 to ground or something.

Tim McDonough -- timmed@cencom.net