[Menu]>[Circuits Gallery]>[Signboard 2]>[Parts explanation]

Acrylic cover for signboard 2

I made a cover using the acrylic board of the glass color. This board looks like a glass board. The cover which was made this time doesn't have a back lid. I bent an acrylic board, using "The bending apparatus-2". The 3-mm holes are open to the four corners of the cover. These holes are to prevent the getting into swing of the board. Top cover assembly Top cover is installed using the 3-mm screw. Reinforcement board assembly The reinforcement board of the triangle is installed in the bottom with the screw. I considered of the removal of PIC easily.