Library making technique New library folder making Library copy (Copy) Parts removal (Remove) Parts name change (Rename) Parts copy (Copy & Paste) Parts making with different packages (Variant) Parts making with different names (Technologies) New parts making ( Symbol, Grid, Wire, Text, Pin, Name, Package, Pad, Device ) Power and Ground symbol making Power symbol (Without terminal) Ground symbol (Without terminal) Power symbol (With terminal) Ground symbol (With terminal) Schematic making technique Add the parts ( Add ) Stop the function ( Cancel ) Display adjustment ( Fit, In, Out, Redraw, Select ) Delete the parts ( Delete ) Move the parts ( Move ) Add power and ground terminals for IC ( Invoke ) Rotate the parts ( Rotate ) Swap the pins of the IC ( Pinswap ) Patrs value setting ( Value ) Parts name setting ( Name ) Change the position of the parts name and value ( Smash ) Wire function ( Wire ) Display the information ( Info ) Wiring connection mark ( Junction ) Electrical Rule Check ( ERC ) Width setting of the pattern ( Class, Net ) Wiring with Power and Ground symbols Tie wirings ( Bus ) Board making technique Size setting of the printed board ( Dimension ) Design Rule Check ( DRC ) Display control of the parts name and value ( Display ) Auto route ( Auto ) Change of the name position ( Move, Rotate, Smash ) Rework of the pattern ( Ripup ) Manual pattern drawing ( Route, Ripup ) Correction of the pattern ( Move, Split ) Making a pattern only on wiring side ( Preferrd Directions ) Pattern check ( Show ) Grounding pattern making ( Polygon, Ratsnest, Ripup ) Thickness of the line of silk printing ( silkwidth.ulp )