POCKET PIC PROGRAMMER
The POCKET programmer is open source software and hardware design by Tony Nixon from Australia. The latest firmware release and documents may be found at http://www.bubblesoftonline.com
The original POCKET design is with SMD parts which are hard to solder by beginners and OLIMEX Ltd. made new PCB layout with only through hole components.
The new POCKET programmer kit is sold by PICLIST (www.piclist.com)
POCKET BILL | OF | MATERIALS: |
|
|
|
R1 | - 82 ohm 1/4W 5% | |
R33 | - 100 ohm 2W 5% | |
R27,R28 | - 220 ohm 1/8W 5% | |
R12,R13,R14,R15,R16, | ||
R17,R23 | - 1K 1/8W 5% | |
R30 | - 1.5K 1/8W 5% | |
R29 | - 2.7K 1/8W 5% | |
R3,R4,R5,R25,R26,R31, | ||
R32,R34 | - 4.7K 1/8W 5% | |
R18 | - 6.8K 1/8W 5% | |
R19 | - 10K 1/4W 5% | |
R20,R21,R22,R24 | - 10K 1/8W 5% | |
R2 | - 18K 1/8W 5% | |
R10,R11 | - 22K 1/8W 5% | |
R6 | - 33K 1/8W 5% | |
R8,R9 | - 47K 1/8W 5% | |
R7 | - 82K 1/8W 5% | |
R35 | - 470K 1/4W 5% | |
VR1 | - 5K TRIMER | |
C9,C10 | - 22pF 25VDC NP0 10% | |
C4 | - 10nF 25VDC 10% | |
C2,C3,C6,C15 | - 100nf 25VDC 20% | |
C5,C11,C12,C13,C14 | - 1uF 25VDC 20% | |
C1 | - 2.2uF 25VDC 20% | |
C7 | - 10uF 16VDC 20% | |
C8 | - 47uF 16VDC 20% | |
Q1 | - quartz resonator 4MHz | |
L1 | - green LED 3 mm | |
L2 | - red LED3 mm | |
D5 | - 1N4004 | |
TR5,TR4 | - BC337-40 | |
TR1,TR2,TR3 | - BC327-40 | |
U10 | - 74LS06 | |
U9 | - 74HC126 | |
U5 | - LM7805 | |
U6 | - LM7808 | |
U1,U2,U3 | - 24LC256/P on DIL8 sockets | |
U11 | - LM358 | |
U8 | - MAX232 | |
U4 | - PIC16F876-04/P on DIL28 socket | |
LCD | - LCD DISPLAY 16x2 | |
LCDdistance | - 2x10pin female distance connector | |
LCD1 | - 1x6pin male connector to LCD pins 1-6 | |
LCD2 | - 1x4pin male connector to LCD pins 12-14 | |
PWR-JACK | -Plug in power supply jack | |
40PINZIF | - ZIF socket 40 pins or 4 pcs 1x20pin female row sockets | |
PARALAX | - 8pin male connector | |
ICSP | - 6pin male connector | |
RS232 | - DB9 9 pin female connector | |
K1, K2, K3, K4 | - push buttons |