HTTP/1.1 200 OK

Date: Tue, 12 Jun 2001 17:36:55 GMT

Server: Apache/1.3.12 (Unix) ApacheJServ/1.1.2

Set-Cookie: Apache=204.210.50.240.24747992367415904; path=/

Last-Modified: Tue, 21 May 1996 20:08:45 GMT

ETag: "a189b-2ea-31a222cd"

Accept-Ranges: bytes

Content-Length: 746

Connection: close

Content-Type: text/plain



7-segment display



This 7-segment display has eight LED's.

All LED's are connected to a common kathode (CK) and have

a built-in 330 ohm resistor.

All components in DigSim are capable of driving this display,

however the easiest way is to use the

BCD to 7-segment decoder.



To light up a segment the CK pin must be connected

to a logic '0'level, and the segment pin (a ... g or dp)

must have a logic '1' level.



    0 = inactive = GND = 0V = OFF

        (Wires are green when inactive)

    1 = active = Vcc = 5V = ON

        (Wires are red when active)



You can drag this display to another position

by clicking inside the body of the display, hold

the mouse button, move to the new position,

and release the mouse button.